====================================================== License Agreement for Fuji Xerox PCL 6 Printer Driver ====================================================== 1. PROPRIETARY RIGHTS: Title, ownership rights, and intellectual property rights in the SOFTWARE shall remain in Fuji Xerox and its third party suppliers. You have no rights in the SOFTWARE except as expressly granted in accordance with this agreement. 2. LICENSE: Under this agreement, you are granted a non-exclusive license to use the SOFTWARE for the purpose of using with compatible Fuji Xerox products in your country. You are not permitted to (1) assign, sublicense, sell, rent, lease, convey, or transfer the SOFTWARE to any third party by any tangible media such as floppy disk, magnetic tape, or CD-ROM, (2) distribute the SOFTWARE on a network or by a telephone line available to the public or (3) alter, modify, decompile, disassemble, reverse engineer, or create derivative works based on the whole or any part of the SOFTWARE. If any direction on usage or restriction for the SOFTWARE is expressly specified in this web site, you are required to follow such direction. 3. TERM: This agreement is effective upon installing the SOFTWARE until you terminate the agreement by destroying the SOFTWARE. This agreement will also terminate if you fail to abide by any terms of this agreement. In case of termination, you must promptly destroy the SOFTWARE. 4. LIMITED WARRANTIES: THE SOFTWARE IS SUPPLIED STRICTLY ON AN 'AS IS' BASIS WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, WITH RESPECT TO THE SOFTWARE. YOU ARE RESPONSIBLE FOR CHOOSING, MAINTAINING AND MATCHING OTHER HARDWARE AND SOFTWARE COMPONENTS IN COMBINATION OF THE SOFTWARE. IN NO EVENT, SHALL FUJI XEROX, FUJI XEROX CHANNEL PARTNERS, AUTHORIZED DEALERS AND THEIR THIRD PARTY SUPPLIERS BE LIABLE FOR ANY LOSS OR DAMAGE INCLUDING INCIDENTAL OR CONSEQUENTIAL LOSS OR DAMAGE, ARISING FROM USE OF OR INABILITY TO USE SOFTWARE, OR ANY MODIFICATION OF THE SOFTWARE. 5. EXPORT CONTROL: You are not allowed to export the SOFTWARE in part or whole, directly or indirectly, in violation of any restrictions, laws or regulations imposed by the government of your country or any other relevant countries, and are required to obtain necessary approval prior to exporting the SOFTWARE. --------------------------------------------------------------------- --- Fuji Xerox Document Centre 286/236 PCL 6 --- --- Printer Driver for Windows(R)9x/Me --- --- Version 2.4.0(29/29) --- --- May 2004 --- --- --- --- Readme --- --------------------------------------------------------------------- This document describes 1. Requirements 2. File Configuration 3. Installation 3.1. Installation on Windows(R)9x/Me 3.2. Installation Using the Plug&Play Function 3.3. Uninstallation 4. General Comments 5. Limitations 6. Software Update 1. Requirements =============== 1. Please note that this printer driver operates on a computer running Windows(R)9x or Windows(R)Me English version 2. File Configuration ===================== fx6sage.inf fx6sae.drv fx6saeu.dll fx6saedm.dll fx6saer.xrs fxlzuiif.dll fxzpdr32.dll fxlzrvif.dll fxlzrscv.dll fxzjpeg.dll fxzddmif.dll fxzdhb32.dll fxzpmc2.dll fxzadcmn.dll fxzarl32.dll fxz2862.dll fx6sae.hlp fx6sae.cnt fx6saex.dll fx6saex.exe fx6sae.xrs fx6sae.cdd fx6sae.ddd fx6sbe.ddd fx6sae.tbl 3. Installation =============== Follow the instructions below to install PCL 6 printer drivers. Here we will install and uninstall the Document Centre 286 PCL 6 printer driver as an example. 3.1 Installation on Windows(R)9x/Me =================================== (1) Double-click the "Add Printer" icon in the "Printers" dialog box from the "Control Panel". (2) Following the steps of "Add Printer Wizard", you can choose the printer port. If your printer is attached to your computer via Parallel port or Serial port, choose "Local printer". If your printer and your computer are connected to the Network, choose "Network printer". (3) After you select the port of the printer, you will see the selection of "Manufactures:" and "Printers:". Click "Have Disk..." in the dialog box. (4) Enter a path to a location of the INF file you are installing. You can also indicate the INF file location by "Browse". Then select the INF file in the "Add Print" folder and then click "OK". (6) "FX Document Centre 286 PCL 6" appears in the "Printers:" in the dialog box. Select the printer and click "Next". (7) When you finished all the steps of the "Add Printer Wizard", a printer icon will be created in the "Printers" dialog box. It is recommended that you print a test page after completion of the printer driver installation in order to check if the driver was installed properly. 3.2 Installation Using the Plug&Play Function ============================================= Note that installation using the Plug&Play function is allowed only if the printer is connected to the PC using a bi-directional parallel cable. (1) Connect the PC and printer using an interface cable with the power supply to the PC and the printer switched off. Then, turn on the power supply of the printer and the PC and start Windows(R)9x/Me. (2) The printer is detected and a "New Hardware found" dialog box is displayed. Select the "Driver provided by hardware manufacturer" and follow the screen instructions. (3) Enter the drive name (e.g.->e:) and the path name of the driver in the "Copy manufacturer's files from" input field on the screen and click the "OK" button. The drive name and path name depends on the location where the driver is. (4) A dialog box for specifying the printer name is displayed. To change the printer name, enter the printer name in the "Printer Name" box. If another printer is already installed, a prompt message is displayed asking whether to use the new installed printer as the default printer. To use this printer as the default printer, select "Yes". (5) After installation, a dialog box for specifying whether to print the test page is displayed. If you select "Yes (recommended)", load A4 or Letter paper in the printer and click "Finish". If you do not wish to print the test page, select "No" and click "Finish". (6) The required files are copied and installation is completed. If the test print is performed, a message is displayed to notify that the test print has been completed. 3.3 Uninstallation ================== (1) Delete the printer icon you installed in the "Printers" dialog box from the "Control Panel". 4. General Comments =================== (1) Close all the running applications before installing the printer driver. (2) Always reboot the computer after installing an upgraded version of the printer driver. (3) If you have deleted an older version of the printer driver, always reboot the computer before installing the new version. (4) Some applications provide printing options pertaining to the number of copies and collated copies. Always select the printing options in the application unless the instructions specify otherwise. Use the printer driver dialogs to select advanced options such as 2 Sided Print, Sample Print or options that are not available in the application. (5) Always close the printer driver dialogs and/or the application Print dialog box before you make any changes to the default settings of the printer driver via the Control Panel. (6) If your Job Offset output does not work well with the collated copies, you may try to deselect the "Collate" option in the application and check the "Collate" check box in the printer driver. (7) A fax job has to be sent separately to each recipient who is specified with the F-code, P-code or secure send attributes. Otherwise, the printer always disregards the F-code, P-code and secure send attributes when sending a fax job to multiple recipients. The transmitted job is always printed directly at all specified destinations. 5. Limitations ============== (1) When a printed pattern or diagram is different from what you see on the screen, changing the following settings may alleviate the problem. * Change the "Print Mode" setting on the "Graphics" tab. * Change the "Brightness" and the "Contrast" settings on the "Graphics" tab. * Set "High Speed Graphics Processing" on the "Detailed Settings" tab to "Off". * Set "High Speed Image Processing" on the "Detailed Settings" tab to "Off". * Set "Draw the pattern with fine lines as per the resolution" on the "Detailed Settings" tab to "On". * Change the "Resolution" setting in the "Other Settings (Graphics Settings)" on the "Detailed Settings" tab. * Change the "Halftone Print" setting in the "Other Settings (Graphics Settings)" on the "Detailed Settings" tab. (2) The print layout may be changed when you change the "Print Mode" in the "Graphics" tab. (3) Depending on the application, if the "Print Mode" is "High Resolution" or the resolution of the driver is "1200dpi", the size of the print data may become huge and printing cannot be done properly. When this happens, specify the following settings: * Specify the "Print Mode" to "Standard" in the "Graphics" tab or "Resolution" in the "Other Settings (Graphics Settings)" in the "Detailed Settings" tab to "600dpi", "300dpi" or "200dpi" (4) When doing a print job by specifying Paper Source as Auto, be sure to set Paper Size in the application to the Paper Size that the driver supports to enable the automatic paper feed feature. (5) When using the Form Overlay feature, use form data of the same Paper Size, Resolution, and Image Settings as those of the document you want to print. If these settings are different between form data and the page where the form data is incorporated, expected print results may not be obtained. (6) With Adobe PageMaker, when this printer is specified for "Compose to printer", a layout may change in printing. This issue can be avoided by performing the following steps; <1> Do not set "Compose to printer". <2> Change the "Margin" setting in advance in the printer folder. <3> Specify "Extended" on the Print Area tab in advance in the printer folder. (7) The print result may overlap if Multiple Up and Print Area [Normal] are selected when printing a document that has exceeded the print area of the printer driver. When this happens, select the "Extended" in the "Print Area" dialog box in the "Margin Shift/Margin" in the "Tray/Layout" tab." (8) When you cancel a fax job in progress from the driver, the application may display a warning dialog box. It may indicate a printer error message, although there is no error in the printer. In this case, ignore the warning message and continue operation. 6. Software Update ================== The latest software is available on our web site. http://www.fxap.com.sg/default.jsp Communication charges will be borne by the customer. Portions of this software are based in part on the work of the Independent JPEG Group. Microsoft is the registered trademark of Microsoft Incorporated. Windows is the registered trademark of Microsoft Incorporated. Other names of products and companies are the trademarks or registered trademarks of each company. Copyright 2003-2004 Fuji Xerox Co., Ltd. All rights reserved. ----------------------------< End of File >--------------------------