1. Updating your system BIOS by AWDFLASH.EXE

***********************************************************************
*                                                                     *
*                           Warning !                                 *
*                         =============                               *
*                                                                     *
*    1. Flash EPROM provides you a convenient way to update your      *
*       system BIOS, please note that updating your system BIOS       *
*       is serious, only update when you need to do it. Un-necessary  *
*       updating cause malfunction of the system are not cover        *
*       within the warranty.                                          *
*                                                                     *
*    2. If you write something wrong to your FLASH EPROM, system      *
*       may not boot anymore, please refer to the manual carefully    *
*       to make sure you follow the correct step in updating, or      *
*       ask qualify technician and/or call your dealer for help.      *
*                                                                     *
*                                                                     *
***********************************************************************

  (1) Make sure the FLASH Read/Write jumper of M/B is correct. If the
      setting is incorrect, the Flash EPROM won't be programed. Please
      refer to the manual to set it respectfully.

  (2) Boot your system from MS-DOS system diskette which contains no
      CONFIG.SYS and AUTOEXEC.BAT files.

      Note: FLASH.EXE can't work under protected mode/virtual mode.
            Memory manager like QEMM386, EMM386, 386MAX should not be
            loaded.

  (3) Type "AWDFLASH", then press "ENTER".

  (4) The AWDFLASH.EXE can support 5 Volt FLASH EPROM(PH29EE010)
      only. Do not continue to program FLASH EPROM if the FLASH type
      is "UNKNOWN".

      \5868V110.BIN      ----- for PCM-5868  Single board computer

  (5) Press "ESC" key to exit.

  (6) Turn OFF power and restart system again.

**************************************************************************
*                                                                        *
*                              Warning !                                 *
*                            =============                               *
*                                                                        *
*     Using incorrect or unauthorized BIOS file might cause entir        *
*     BIOS including Boot Block be damaged which the system can't        *
*     be rescued from floppy anymore.                                   *
*                                                                        *
**************************************************************************