PenMount DMC9000 Linux X Window drivers & utilities 
Version: 1.0(Support Suse 9.3)

Files:
Driver/                      -- Penmount driver
Calibration/                 -- Penmount calibration utility
XF86Config.sample            -- XF86Config sample

Please check your RedHat version first and download the PenMount driver,
then follow the procedures to install Linux driver and calibration utilities.

A. Driver installation procedures:

  1. Login system with "root"
  
  2. Copy penmount driver "penmount_drv.o" into the directory named"/usr/X11R6/lib/modules/input"  
     EX: #mount /dev/cdrom /mnt/cdrom  
         #cp /mnt/cdrom/Driver/Linux/Driver/penmount_drv.o /usr/X11R6/lib/modules/input
     
  3. Edit XF86Config file to load driver. You can refer to "XF86Config.sample"         
         
     a. # gedit /etc/X11/XF86Config  (in Xwindow only, or you can use "vi" text mode editor)
                                     (use copy and paste to modify the following lines)

     b. In the Section "ServerLayout", add a statement :

        InputDevice    "Penmount" "AlwaysCore"

     c. Add a Section "InputDevice" :¡]Here we suppose that touch screen controller is connecting         to COM1)

        Section "InputDevice"
        
	Identifier  "PenMount"
	Driver      "penmount"
	Option      "Protocol"	   "Auto"
	Option      "Device"	   "/dev/ttyS0"  #ttys0=COM1,ttys1=COM2
	Option      "PMode"        "1"
	Option	    "MinX"	   "10"
	Option	    "MaxX"	   "1000"
	Option	    "MinY"	   "10"
	Option	    "MaxY"	   "1000"
        Option      "Beep"         "1"		#  0 = no beep, 1 = beep enabled
        Option      "PressVol"     "100" 	#  volume of beep (press event)
        Option      "PressPitch"   "880" 	#  pitch of beep (press event)
        Option      "PressDur"     "15" 	#  length of beep in 10ms (press event)
        Option      "ReleaseVol"   "0"		#  volume of beep (release event)
        Option      "ReleasePitch" "1200"	#  pitch of beep (release event) 
        Option      "ReleaseDur"   "10"		#  length of beep in 10ms (release event)	
        EndSection
        
  4. # startx
  5. Do calibration for the first installation.
  6. The Penmount can work well.      

B. Calibration Utilities Installation procedures:

  1. Copy the calibrate file into the "/usr/local/pencal" directory.
     EX: # mkdir /usr/local/pencal
         # cp /mnt/cdrom/Driver/Linux/Calibration/* /usr/local/pencal

  2. Input "startx" to start X window.
     EX: # startx

  3. In the X window system, open a terminal window and type
     EX: # cd /usr/local/pencal
         # ./adv-calib [4|9|16]
           ./adv-calib 4  (=calibration 4 point)
           ./adv-calib 9  (=calibration 9 point)
           ./adv-calib 16 (=calibration 16 point)

  The display will appear a calibration window, follow up the red points to do calibration, 
  When calibration window close then Finished! 
 
  4. To get more information, type
     EX: # ./adv-calib

Copyright (c) By Dialogue Technology Corp. All rights reserved. 
2005/11/23